Angel Eye LED headlight
instructions

Product
LED headlights
Applies to
Angel Eye, white and RGB
Steps
6 illustrated steps
Help
WhatsApp, before and during

Mounting, aiming and connecting the low-beam ring and the central high-beam LED.

  • Steps 6 stepsFrom unboxing to the final test
  • In the package InstructionsThe sheet with all the connections
  • Help WhatsAppWe guide you through the installation

Step by step

How to install it.

Applies to the whole range: Angel Eye, Energy Hexagonal, 7 LED headlight and replica LED headlights. The headlight is mounted on the headlight mask, with plug-and-play connectors.

  1. 01

    Check headlight and connectors

    Check the package contents: headlight, wiring and connectors. Our headlights are plug and play, with compatible connectors for every bike model: no need to modify the original wiring harness.

  2. 02

    Remove the headlight mask and the original headlight

    Remove the headlight mask from the bike (straps or screws, depending on the model) and unplug the original headlight from its connector.

  3. 03

    Mount the new headlight on the headlight mask

    Fasten the Energy headlight to the headlight mask — V-Face, KTM, Husqvarna or Beta depending on your kit — and check that it's secure and aligned. If your headlight mask isn't compatible, our V-Face plastics are available separately.

  4. 04

    Plug in the connectors

    Plug the headlight connector into the wiring harness connector: it's plug and play, no cutting or soldering. Route the cable so it doesn't get pinched by the handlebar at full lock.

  5. 05

    Angel Eye: check the power supply

    The Angel Eye ring needs a battery or an AC/DC converter to work. If your wiring harness has no battery (stator), add the converter before connecting the headlight. For questions about the functions and controls of the RGB headlights, message us on WhatsApp.

  6. 06

    Refit the headlight mask and test the lights

    Refit the headlight mask on the bike and check the low beam, high beam and — if fitted — the Angel Eye ring. Make sure the light beam is aimed correctly.

Something
not working?

Before you take everything apart, check here: most problems can be solved in a few minutes.

The headlight won't turn on

Check that the connector is fully plugged in and that the headlight type suits your wiring harness: with manual and automatic charging we recommend LED headlights only, with the stator harness halogen headlights.

The Angel Eye ring stays off

The Angel Eye ring only works with a battery or an AC/DC converter: if your wiring harness is powered by the stator alone, add the converter. Also check the ring's dedicated connector.

My bike's headlight mask isn't compatible

Our headlights fit V-Face and similar headlight masks, KTM (EXC-SX), Husqvarna and Beta. If yours isn't compatible, you'll find V-Face plastics in 8 colors and headlight mask straps right in our shop.

Need a hand with your headlight?

We'll help you choose the right headlight for your headlight mask and wiring harness, directly on WhatsApp.

Back to the instructions center Message us on WhatsApp